|
|
|
|
|
3-2 Installation XBOX360™ into XB01 02 |
|
|
|
24. Remove the DVD bracket, mount the DVD into the bracket with the long screws included in the accessories bag, and place it into the XB01, secure it with screws. |
|
|
25. Remove the HDD cage, place XBOX360 HDD into the HDD cage, secure it with screws, and mount the HDD module back into XB01. Secure with screws.
|
|
|
26. Plug the DVD power connector to the mainboard, connect the SATA cable to the DVD and mainboard.
|
|
|
27. Connect the Xbox 360 HDD with the original connector to the main board.
|
|
|
28. Secure the air duct to the XB01. Make sure there are no parts in contact with the mainboard and the air duct which may cause a short circuit (The air duct must be installed correctly, If the XB01 does not have the airduct installed, the Xbox 360 will overheat, and get damaged as a result).
|
|
|
29. Before closing the side panels, check all the steps above again, check that you secured the Xbox 360 mainboard with eight screws from the rear of the mainboard tray. Again make sure all the parts are installed correctly.
|
|
Finished |
