|
|
|
|
|
3-1. Installation XBOX360™ into XB01 01 |
|
|
|
16. Remove both side panels of the XB01, place the XB01 on the flat surface, and remove the air duct.
|
|
|
17. Install seven stand-off mounting screws to the mainboard tray with the included tool which you can find in the accessories box.
|
|
|
18. Remove the RF module holder |
|
|
19. Mount the RF module to the RF module holder, and plug the RF module into the mainboard. |
|
|
20. The PC-XB01 was designed for non-HDMI and HDMI version of Xbox 360, and please use the coordinated MYLAR plastic plate to cover the opening. |
|
|
21. There are two different types of fan connectors for the Xbox 360. For non-HDMI version please use the four-pin connector. For the HDMI version, please use the three-pin connector. Plug the fan connector to the main board, and connect the 120mm fan. |
|
|
22. Place the mainboard with RF module into the XB01. You may need to slide the mainboard in at an angle to allow the RD module to get into the case.
|
|
|
23. Secure the main board and RF module with corresponding screws. (Please use the long screws which are include in the accessories bag to secure the USB connector in the top left hand side of the image) Connect the fan connector to the corresponding power cable. |
