2-1. Opening XBOX360™ HDD module
|
||
|
|
|
|
|
|
11. To open up the HDD module, you will need a Torx 6 screw driver, there are four screws that hold the cover together, and one is under the Microsoft™ logo, therefore opening it will break your warranty on the Xbox 360 HDD module. Open the top cover, there will be some parts which fall off; they are the mechanism to lock /unlock the HDD module to the XBOX360 console. |
|
|
12. Once the screws are removed, open the cover, using a Torx 10 driver to remove the screws, and release the metal shield cover. |
|
|
13. Open the shield cover, and you should see one SATA HDD inside the HDD module. |
|
|
14. Unplug the SATA connector, and slide the HDD out from the HDD module. |
|
|
15. Pop the HDD module connector; you will need it to connect the HDD with the Xbox 360 main board. |
