PC – TU200 has a rugged design. In the top of the flip handle makes for easy transport.
There is a 140mm intake fan input high air flow volume with lower RPM to push the cold air through the HDD cage.
Sata hot swap HDD cage, using thumb screws with rubber suspension, supports four 3.5″ HDDs.
Supports two 2.5″ HDDs .
(Use the 3.5″ space)
To release the side panel, simple just un-do the thrumb screw, and push the arm.
Users can easily access USB 3.0, e-SATA and HD Audio ports.
TU200 has equipped a graphics card holder to hold the graphics card in position, avoid from bending and damage.
Stanrdard ATX PS/2 power supply unit with cooling fan, it can be facing the motherboard which are passive cooled.
|Case Type||Mini tower chassis|
|Front bezel Material||Aluminum|
|Net Weight||3.15 kg|
|5.25" drive bay (External)||1|
|3.5" drive bay (External)||None|
|HDD bay||3.5-Inch HDD x4
2.5-Inch HDD x2 (One used in the 3.5-inch bay)
|System Fan (Front)||140mm Fan x 1|
|System Fan (Top)||None|
|System Fan (Rear)||None|
|Removable HDD Racks||e-SATA
USB3.0 x 2
|Maximum Compatibility||VGA Card length: 300mm
PSU length: 140mm
CPU cooler height:80mm